BLUETTI AC2P Portable Power Station | 300W 230.4Wh

The BLUETTI AC2P is an extraordinarily lightweight and user-friendly energy storage solution. With a 230.4Wh capacity and 300W power output, the AC2P can cover most power needs of essential devices. The ability to charge to 80% capacity in just 45 minutes makes it the perfect companion for outdoor activities, emergency relief, RV travel, and more.

FEATURES

• Portable & lightweight, perfect for your backpack
• Small but mighty with a 600 power lifting capacity
• Rapid 270W turbo charging that fully charges in just 70 minutes
• Safe and durable for long-lasting use
• Intelligent app remote control functionality

BATTERY INFO

• Capacity: 230.4Wh / 9Ah
• Type: LiFePO4 (Lithium Iron Phosphate)
• Life Cycles:
• 3,000+ Cycles to 80% Original Capacity
• Shelf-life: Recharge to 80% Every 3-6 Months
• Management System: MPPT Controller, BMS, etc.

OUTPUT

• AC Outlets: "2 ×120V/2.5A 300W In Total"
• Inverter Type: Pure Sine Wave
• Surge Power: 600W
• USB-C: 1 ×100W Max.
• USB-A: 2 ×5VDC/2.4A 12W (Each Port)
• 12V DC Outlets: 1 ×12V/10A (Car outlet, regulated.)

INPUT

• AC Power Input (Turbo Mode): 270W Max.
• Solar Input: 200W Max, 12V-28VDC, 8.2A
• Car Input: 12/24V from Cigarette Lighter Port
• Max Input: 270W

RECHARGE TIMES

• AC Charging Cable (270W Turbo Charging): ≈1.2 Hours
• Solar Panel (s)(200W): ≈1.5 Hours (With prime sunshine, ideal orientation and low temperature)

GENERAL

• Pass-through Charging: Yes
• Weight: About 3.6kg / 7.9lbs
• Dimensions (L x W x D): 250 × 156.5 × 174.5mm / 9.8 × 6.16 × 6.87in
• Charging Temperature: 0°C-40°C / 32°F-104°F
• Discharging Temperature: -20°C-40°C / -4°F-104°F
• Storage Temperature: Storage Temperature
• Certifications: UL Standard, CEC, DOE, FCC, CA Prop 65
• Warranty: 5 Years

IN THE BOX

• AC Charging Cable
• Solar Charging Cable
• Grounding Screws
• User Manual
• AC2P Power Station

Dimensions (L x W x D): 250 × 156.5 × 174.5mm / 9.8 × 6.16 × 6.87in

What battery chemistry is used with AC2P?

The AC2P uses Lithium-ion Phosphate batteries (LiFePO4) for safety and durability, ensuring over 3,000 charge cycles while retaining 80% capacity.

What is Power Lifting Mode？

The IPower Lifting Mode allows AC2P to run high-power heating devices up to 600W, such as space heaters, hair dryers, electric kettles, electric blankets, etc. Do NOT use these units to run an air conditioner or washing machine as the built-in motors / compressors may have a surge power of 2-4 times the rated power, which may exceed the output of AC2P.

Can I charge and discharge AC2P at the same time?

Yes.

How do I know if AC2P can power my loads?

Calculate the total wattage of your devices and ensure it doesn't exceed the rated power of AC2P, which is 1,000W. The Power Lifting Mode only works for resistive loads of up to 2,000W.

How quickly can I charge the AC2P?

The AC2P supports up to 950W AC input. Plug it into a wall outlet and enable the Turbo Charging mode on the BLUETTI App, and you can fill it up in only 1.5 hours.

What's the difference between Silent, Standard, and Turbo Charging modes?

These are the 3 AC charging modes, each with a different input power and charging speed. The AC2P generates only 45dB of sound in the silent charging mode, while Turbo Charging mode provides a higher charging speed.

Does AC2P support BLUETTI App control?

Yes, via Bluetooth.

What solar panel should I choose?

To ensure compatibility and optimum performance we highly recommend using the AC2P: 2 x BLUETTI PV200 Solar Panels.

Is the AC2P waterproof?

No.

Can I charge or discharge AC2P in sub-zero temperatures?

You can charge the AC2P to power your devices in cold weather, but avoid recharging it below freezing. The operating temperature ranges for AC70P are:

• Charging: 32°F-104°F/0°C-40°C
• Discharging: -4°F-104°F/-20°C-40°C.

Can I lay the AC2P on its side to save space?

No, this may damage the internal structure. Please keep it upright during storage or moving.

Can I replace the built-in battery?

No. If the internal battery pack malfunctions or is dead, please contact BLUETTI Support for further assistance.