What battery chemistry is used with AC2P?
The AC2P uses Lithium-ion Phosphate batteries (LiFePO4) for safety and durability, ensuring over 3,000 charge cycles while retaining 80% capacity.
What is Power Lifting Mode?The IPower Lifting Mode allows AC2P to run high-power heating devices up to 600W, such as space heaters, hair dryers, electric kettles, electric blankets, etc. Do NOT use these units to run an air conditioner or washing machine as the built-in motors / compressors may have a surge power of 2-4 times the rated power, which may exceed the output of AC2P.
Can I charge and discharge AC2P at the same time?Yes.
How do I know if AC2P can power my loads?Calculate the total wattage of your devices and ensure it doesn't exceed the rated power of AC2P, which is 1,000W. The Power Lifting Mode only works for resistive loads of up to 2,000W.
How quickly can I charge the AC2P?The AC2P supports up to 950W AC input. Plug it into a wall outlet and enable the Turbo Charging mode on the BLUETTI App, and you can fill it up in only 1.5 hours.
What's the difference between Silent, Standard, and Turbo Charging modes?These are the 3 AC charging modes, each with a different input power and charging speed. The AC2P generates only 45dB of sound in the silent charging mode, while Turbo Charging mode provides a higher charging speed.
Does AC2P support BLUETTI App control?Yes, via Bluetooth.
What solar panel should I choose?To ensure compatibility and optimum performance we highly recommend using the AC2P: 2 x BLUETTI PV200 Solar Panels.
Is the AC2P waterproof?No.
Can I charge or discharge AC2P in sub-zero temperatures?You can charge the AC2P to power your devices in cold weather, but avoid recharging it below freezing. The operating temperature ranges for AC70P are:
- Charging: 32°F-104°F/0°C-40°C
- Discharging: -4°F-104°F/-20°C-40°C.
Can I lay the AC2P on its side to save space?No, this may damage the internal structure. Please keep it upright during storage or moving.
Can I replace the built-in battery?No. If the internal battery pack malfunctions or is dead, please contact BLUETTI Support for further assistance.
(SEE PV120 PRODUCT PAGE FOR SOLAR PANEL FAQ)